|
Overview
The Model 726 Power Supply
provides a filtered and regulated 18 Vdc output with a maximum current
of 5 amperes. The nominal input voltage is 120 V, 47 to 63 Hz, with an
allowable input voltage range of 110 to 240 V. The Model 726 is
Underwriters Laboratories, Inc. LISTED (pending).
Model 726 Specifications
Input
Voltage: 110-240 V,
47-63 Hz, single phase
Input
Current: 1.6 A rms
steady state, maximum
Power
Cord: 3-conductor
with plug, length 6 feet (2 meters), nominal, not detachable
Output
Voltage: 18 ±1 Vdc (with 100 mA minimum load)
Output
Current: 5 A
maximum, continuous
Output
Current for Automatic Shutdown:
5.6 A, nominal
Minimum
Load Current for Optimal Regulation:
100 mA
Load
Regulation: less
than 1%, load current 100 mA to 5 A, input voltage 110 to 240 V
Output
Ripple Voltage:
less than 10 mV rms, maximum
Output
Compliance:
complies with FCC Part 68 for talk battery quality
Input-to-Output Efficiency:
greater than 85% at full
load
Output
Connections:
3-position detachable screw terminal strip
Transient
Protection: input
and output protected against transients
LED
Indicator: 1,
indicates DC output
Operating
Environment: –10 to
50 degrees C, humidity to 95% (no condensation)
Radiated
Noise Compliance:
complies with FCC Part 15, subpart J, class A for radiated and conducted
emissions
Safety
Compliance:
Underwriters Laboratories, Inc. CUL-1950 ITE LISTED
Dimensions:
4.7 inches high (11.9 cm)
7.4 inches wide (18.7 cm)
2.3 inches deep (5.8 cm)
Mounting: wall mounted only using two #8 pan head screws
Weight: 2.8 pounds (1.3 kg)
Specifications
subject to change without notice.
|
Additional
Information: |
|
|
|
Data Sheet |
Technical Practice
- Pending |
|
|
