Welcome to Gordon Kapes, Inc.

Home PageProductsSupportDownloadsNews & EventsAbout UsContact Us

Model 737 DC Power Supply with Battery Back-UpComing Soon!

Overview

Model 737 Front View

 

Model 737 Back View

The Model 737 DC Power Supply with Battery Back-Up provides a filtered and regulated source of 27 Vdc with a maximum output current of 5 A. The nominal input voltage is 110-240 V, 60 Hz. Rechargeable batteries contained within the Model 737 provide output back-up capability in the event of an AC input voltage interruption. Under battery operation, the Model 737 will continue to supply a 5 A DC output for up to nominally two hours. For output loads of less than 5 A the battery operating time will substantially increase. The unit is completely self-contained in a compact enclosure. Mounting kits, available separately, allow the unit to be wall or rack mounted. The Model 737 is Underwriters Laboratories, Inc. LISTED under their CUL (Canada-United States) UL-60950 ITE category.

Model 737 Specifications

Input Voltage: 110-240 volts, 47-63 hertz

Input Current: 3.0 amperes, maximum

Input Power Cord:
Type: 3-conductor with North American-standard NEMA 5-15P plug. Plug can be replaced as required. Conductors have CEE color code.
Length: 6 feet (2 meters), nominal, not detachable

Output Voltage:
27 volts DC, nominal, with AC input voltage present
24 volts DC, nominal, battery operation; no AC input voltage present

Output Current: 5.0 amperes continuous, maximum

Recommended Minimum Output Load Current: 100 milliamperes (helps maintain correct charge voltage)

Output Ripple Voltage: less than 100 millivolts p-p; “talk-battery” quality

Output Protection:
Type: solid-state, automatic reset

Current Required for Automatic Output Shutoff: 5.2 A, nominal

Batteries: 2
Type: 12 V, 7.2 Ah, sealed lead-acid (Panasonic LC-R127R2P)
Transportation: classed as “Non-Spillable”

Battery Operating Time (Nominal):
1 hour, 5.0 A output load
2 hours, 2.5 A output load
7 hours, 1.0 A output load
14 hours, 0.5 A output load

Battery Charge Time (Nominal):
36 hours, 5.0 A output load
12 hours, 2.5 A output load
2.5 hours, no output load
Figures reflect charging process beginning with batteries in fully discharged state (worst-case situation)

Automatic Battery Disconnect:
Type: solid-state
Operating Threshold: 21 V, nominal

Input-to-Output Efficiency: 86%, nominal, measured with 5.0 A output load

Output Connector—3-Position:
Functions Supported: ground, DC output
Type: Phoenix Contact (or equivalent) pluggable terminal strip, 0.2-inch (5.08 mm) contact centers
Mating Plug (included with Model 737): Phoenix part number IC2,5/3-ST-5,08 (Phoenix order number 1786187) or equivalent

Output Connector—6-Position:
Functions Supported: ground, DC output, status contact
Type: Molex® Mini-Fit, Jr.™ 6-position dual row header
Mating Connector: Molex Mini-Fit, Jr. 6-position dual row receptacle, suggested Molex part number 39-01-2060; suggested crimp-on female terminals Molex part number 39-00-0039

Interconnecting Cables:
One or two interconnecting cables required for every installation; purchased separately, not included with Model 737. Various lengths and configurations available from Gordon Kapes, Inc.

LED Status Indicators: 2
Functions: AC input present, DC output present

Status Contact:
Action: normally open (not shorted)
Type: sealed bifurcated relay contact, isolated
Rating: 0.5 A maximum at 60 Vac or 60 Vdc (resistive)
Function: closes (shorts) upon loss of AC input power, defined as nominally less than 85 Vac

Safety Compliance: Underwriters Laboratories, Inc. CUL-60950 ITE LISTED

Radiated Noise Compliance: complies with FCC Part 15, subpart J, class A for radiated and conducted emission

Operating Environment:
68 degrees F (20 degrees C), nominal. Intended for operation in commercial environment where air conditioning is present. Operation at temperatures greater than recommended will significantly reduce battery life.

Dimensions (Overall):
2.9 inches high (7.4 cm)
17.0 inches wide (43.2 cm)
9.1 inches deep (23.1 cm)
Figures reflect no mounting brackets attached

Mounting: wall, 19-inch rack, or 23-inch rack mounting kits available, purchased separately. Rack mounting requires two standard rack spaces (3.5 vertical inches). A mounting kit is required for every installation; not included with Model 737.

Weight:
32.7 pounds (14.9 kg)
35.2 pounds (16.0 kg), shipping weight
Figures reflect no mounting brackets attached

 

Specifications subject to change without notice.

 

Additional Information:

 

 

Data Sheet

Technical Practice

 

Home  |  Products  |  Support  |  Downloads  |  News & Events  |  About Us  |  Contact Us

Click here to email Sales

Phone: 847-676-1750  Fax: 847-982-0747
Copyright ©2008 Gordon Kapes, Inc. All rights reserved.